Update Galaxy S6 Active SM-G890A G890AUCU3BOJE Android 5.1.1


G890AUCU3BOJE Android 5.1.1 Lollipop is the New Official Firmware Update for Galaxy S6 Active SM-G890A and today we will help you to download this new Official Firmware Update for SM-G890A and also we will help you to install it with our Step-by-step Complete Installation Guide. Yes Android always offering the best and the easiest Guides with the download links of the Firmware Files, Samsung Galaxy Firmware Download (Galaxy Firmware Original, Galaxy Firmware Update/Upgrade) plus to Installation Guides/Tutorials is our main goal in Yes Android USA, so we are not always offering here Android apps, but sometimes we do that with special featured apps to do something we need.

Now you can get your best Cup of Coffee or your best drink and keep focusing with next Step-by-Step Guide to avoid any problems or mistakes. Also at the end of this post you will find a short video that explained How to Flash any Samsung device manually with Odin (You will know more about Odin just complete the tutorial).
Update Galaxy S6 Active SM-G890A G890AUCU3BOJE Android 5.1.1
Now you should know that there are several ways to Update Official Firmware, so if you want to Update your Galaxy S6 Active SM-G890A Official Firmware to G890AUCU3BOJE Android 5.1.1 Lollipop, you will do it with one of the two following methods. These methods is, Official Methods to Update Galaxy S6 Active SM-G890A and the other method is the Manual method. Official method have two ways that we can use one of them to Update S6 Active SM-G890A Firmware, these ways is, Through Samsung Kies and Through OTA (Over The Air), but if we can't get this update with these official ways or this Official Method, we will move to the other method and as we said before it is the Manual method and in this method we will use a Windows Based Tool Called Odin.

Don't jump to another part of the post :) because i want to tell you an important thing, this Firmware Update is Only for Galaxy S6 Active SM-G890A, so please don't try this Firmware Update with any other model. Make sure that your phone model number is SM-G890A not any other model number, so let's make it officially.

Note: This Firmware Update is only released for S6 Active SM-G890A and not for any other model, so Yes Android USA is not responsible for any damage caused in your phone. Do it at your own risk, and please don't mistake and do it the right way.

Related To Galaxy S6 Active :

Update Galaxy S6 Active SM-G890A G890AUCU3BOJE Android 5.1.1

Always we advise you to update your Android Phone Firmware to fix Bugs and Errors, also it will increase the performance of your phone and sometimes add some features. We will help you to do that, so let's begin the Firmware Installation Guide.

How to Update Galaxy S6 Active SM-G890A to G890AUCU3BOJE Android 5.1.1 Lollipop?

Before doing anything create a full backup of your important data to avoid data lose and make sure that your phone's battery is fully charged or have 75% at least.

[1] Update Galaxy S6 Active SM-G890A with the Official Method (Recommended)

(a) Get the Official Firmware Update through Samsung Kies :

As we said before that the Official Method have two ways to Update your Galaxy S6 Active Firmware to G890AUCU3BOJE Android 5.1.1 Lollipop, and this way is one of them, yes through Desktop Samsung Kies, so follow the following instructions to get this Firmware Update:

- Download, install Samsung Kies to your PC, and run it.
- Make Sure that is your Computer is connected to the Internet.
- Connect your Galaxy S6 Active SM-G890A to USB port in your PC via USB data transfer cable.
- Wait for your Galaxy S6 Active to appear on the upper left side of the window.
- Click on the device name that appeared on Kies it will be (SM-G890A).
- A new window will appear on the right side of Kies.
- Under the "Firmware Information" tab, see if there are any updates available. If there are any Updates available you will see this message "New Firmware is available".
- To start installing this G890AUCU3BOJE Android 5.1.1 Lollipop on Galaxy S6 Active SM-G890A press the "Firmware Upgrade" button.
- A new window will appear and this process contains more phases: (Download > Upgrade > Complete).
- At the end of Updating Galaxy S6 Active SM-G890A to G890AUCU3BOJE Android 5.1.1 Lollipop, your device will reboot and now you can safely disconnecting the USB cable from your phone.
- You can verify if you have the G890AUCU3BOJE Android 5.1.1 Lollipop Official Firmware Update by going to: Settings > More > About phone, you will find the new Firmware details.

(b) Get the Official Firmware Update through OTA (Over The Air) :

It is the second way to get the Firmware Update for your Galaxy S6 Active SM-G890A, so follow the following steps to get the Firmware Update G890AUCU3BOJE Android 5.1.1 Lollipop.

- Make Sure that is your Phone is connected to the Internet, we recommend you to use Wi-Fi connection.
- Go to Settings on your S6 Active SM-G890A.
- Choose More Tab, if you don't have More Tab Skip this Step.
- Choose About Phone.
- Choose Software Update.
- Click on "Check For Updates". It will take few seconds or even 1 minute to check for updates, so if there any new updates available for your S6 Active SM-G890A you will get this message "New Firmware Update Available".
- If you get this message, click Download or Update Now.
- After downloading click Install to start Firmware Updating Installation Process.
Short Explain For OTA: Settings > More > About Phone > Software Update > Check For Updates.

[2] Update Galaxy S6 Active SM-G890A with the Manual Method (Using Odin)

Odin is a MS Windows based tool to help Windows Users to Flash Firmware Manually. You will find more about Odin and how to use it Here

As we said we will use Odin to Flash the New Firmware Update G890AUCU3BOJE Android 5.1.1 Lollipop on Galaxy S6 Active SM-G890A and i repeat S6 Active SM-G890A only not any other model number even if it is with the same Phone Model Name. Again [[SM-G890A]] Only :) . To complete Flashing/Updating your Current Firmware successfully with Odin, please follow the following steps carefully.

(a) Download the Firmware File ATT-G890AUCU3BOJE-20151120161948

G890AUCU3BOJE Android 5.1.1 Lollipop Official Firmware Details:

UCU3BOJE Firmware
Model : SM-G890A
Model Name : Galaxy S6 Active
Country : USA (AT&T)
Version : Android 5.1.1
Changelist : 6145392
Product Code : ATT
PDA : G890AUCU3BOJE
CSC : G890AATT3BOJE

ATT-G890AUCU3BOJE-20151120161948 Download From another Mirror

If there are another Country/Carrier for S6 Active SM-G890A and your are looking for it, just go to This Page.

(b) Extract the Firmware File you downloaded ATT-G890AUCU3BOJE-20151120161948.ZIP , Yes it is the name of the Firmware File.

(c) Download Odin 3.10.7 from Here.

(d) Extract Odin 3.10.7 ZIP File.

(e) Download and Install S6 Active SM-G890A USB driver from Here.  If you already have Samsung Kies installed on your PC, you will not need to download the USB driver. No problem if you downloaded and installed it again.

(f) Enable USB Debugging Mode on your S6 Active SM-G890A.
To Enable USB Debugging Mode go to your phone Settings and activate Developer Options, then Enable USB Debugging Mode option.

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

If you can't find Developer Options in your Phone Settings Go to Settings > More > About Phone > Press 7 Times on Build Number to Enable and Show Developer Options.

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

(g) Turn Off your Phone and Turn it on again into the Download Mode.
To Enter Download Mode Press and Hold "Power + Volume Up + Home Button" all at the same time.

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

When you see the warning message release the buttons and press Volume Up button to confirm Entering the Download Mode.

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

(h) Start Odin in Your PC (You Need to run Odin as Administrator).

(i) Connect your Galaxy S6 Active SM-G890A to your PC via USB Cable.

(j) If your S6 Active SM-G890A is recognized in Odin, you will See in Odin a section called ID:COM turned into Blue color (on the left upper side of Odin window). If the Phone is not recognized, make sure that you have installed the USB Driver.

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA
G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

(k) Check "AP" box or in some Odin versions you will find it called "PDA", after checking "AP/PDA" box, click on "AP/PDA" button and add the Firmware File you just extracted from the Firmware ZIP File. The Firmware File name should be ATT-G890AUCU3BOJE-20151120161948.tar.md5 .

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

(l) This step is very Important. Don't Place anything under the "PIT" section and make sure that "Re-partition" is not checked (In the newer versions of Odin you will find in the left side a tab called PIT).

(m) Make sure that you only checked this options in Odin (Auto Reboot, F.Reset Time). These options is checked by default.

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

(n) When the Firmware File (ATT-G890AUCU3BOJE-20151120161948.tar.md5) is loaded in Odin, Press Start to begin the Firmware Updating/Installation Process.

Notes:
- If you are installed any kind of Custom ROMs on your S6 Active SM-G890A such as "CyanogenMod ROM, ParanoidAndroid ROM, SLIM ROM, AOKP ROM, Avatar ROM, Omni ROM, PACman ROM, KiquidSmooth ROM, Beanstalk ROM or Carbon ROM", it will replaced with the new Stock Firmware or the new Stock ROM.

- If you are installed any Kind of Custom Recovery on your SM-G890A such as "CWM Recovery, TWRP Recovery", it will replaced also by the new Stock Recovery.

- If your S6 Active SM-G890A is Rooted, you will lose your Root. Don't worry you will be able to Root your S6 Active SM-G890A again after Upgrading your Current Firmware, but you can do it if the Root files is available for the new Firmware UCU3BOJE 5.1.1 Lollipop SM-G890A.

(o) It's not recommended to move or touch the USB Cable while the Firmware is being Flashed to avoid any Errors or Disconnecting.

(p) You will see on the left upper side of Odin window a message with a green background sayin PASS!!. It means that is the Firmware Update is Successfully installed on you S6 Active SM-G890A. Your device will reboot now and run on the New Firmware.

G890AUCU3BOJE Android 5.1.1 Lollipop Galaxy S6 Active SM-G890A - Yes Android USA

(q) Finally you may face Stuck in bootloop problem. If your S6 Active SM-G890A stuck in bootloop, turn it off and start it again into Recovery Mode by Pressing and hold (Volume Up + Home + Power) buttons all at the same time. When entering the Recovery Mode, Choose "Wipe Cache Partition" > "Wipe data/factory reset" > "Yes delete all user data" > "Reboot system now", after that your phone will start normally again.

Now your S6 Active SM-G890A should run with the New Firmware Update G890AUCU3BOJE 5.1.1 Lollipop.

SM-G890A Firmware Update Summary Guide

[1] Firmware Update with Official Methods:

(a) Update the Firmware with Samsung Kies :

- Download, install Samsung Kies to your PC, and run it.
- Make Sure that is your PC is connected to the Internet.
- Connect your Phone to USB port in your PC via USB data transfer cable.
- Wait for your Phone to appear on the upper left side of the window.
- Click on the device name that appeared on Kies it will be (SM-G890A).
- A new window will appear on the right side of Kies.
- Under the "Firmware Information" tab see if there are any updates available. If so, you will see this message "New Firmware is available".
- To start installing the Firmware Update press the "Firmware Upgrade" button.
- A new window will appear and this process contains more phases: (Download > Upgrade > Complete).
- At the end of Firmware Updating Process, your device will reboot and now you can safely disconnect the USB cable from your phone.
- You can verify if you have the New Official Firmware Update by going to: Settings > More > About phone.

(b) Get the Official Firmware Update through OTA (Over The Air) :

- Make Sure that is your Phone is connected to the Internet, we recommend you to use Wi-Fi connection.
- Go to Settings on your S6 Active SM-G890A.
- Choose More Tab, if you don't have More Tab Skip this Step.
- Choose About Phone.
- Choose Software Update.
- Click on "Check For Updates", if there any new updates available for your Phone you will get a message says " New Firmware Update Available".
- If you get this message, press Download or Update Now.
- After downloading click Install to start Firmware Updating Installation Process.

[2] Update your Phone with the Manual Method (Using Odin)

(a) Download the Firmware File.
(b) Extract the Firmware File.
(c) Download Odin 3.10.7.
(d) Extract Odin 3.10.7 ZIP File.
(e) Download USB driver for your Phone.
(f) Enable USB Debugging Mode on your Phone Settings.
(g) Turn Off your Phone and Turn it on into the Download Mode.
(h) Start Odin in Your PC (Run Odin as Administrator).
(i) Connect your Phone to your PC via USB Cable.
(j) If your Phone is recognized in Odin, you will See in Odin a section called ID:COM turned into Blue color.
(k) Check "AP/PDA" box and click on "AP/PDA" button to add the Firmware File.
(l) Important!! Don't Place anything under the PIT section and make sure that "Re-partition" is not checked.
(m) Make sure that is these options in Odin is only checked (Auto Reboot, F.Reset Time).
(n) When the Firmware File is loaded in Odin, Press Start to begin the Firmware Updating/Installation Process.
(p) You will see on the left upper side of Odin the success message with a green background. It means the Firmware Updating Process Completed Successfully.

If you like my work and think this tutorial can, help you can make a Small Donation to help keeping this Blog Alive. You can make your PayPal Donation through this page. Thank You.
 
Don't Forget to share :). Also you can watch this short Video to learn:

How to Flash any Samsung Official Firmware manually with Odin