Update Note 4 SM-N910V N910VVRU2BOG5 Android 5.0.1


N910VVRU2BOG5 Android 5.0.1 Lollipop is the New Official Firmware Update for Galaxy Note 4 SM-N910V and today we will help you to download this new Official Firmware Update for SM-N910V and also we will help you to install it with our Step-by-step Complete Installation Guide. Yes Android always offering the best and the easiest Guides with the download links of the Firmware Files, Samsung Galaxy Firmware Download (Galaxy Firmware Original, Galaxy Firmware Update/Upgrade) plus to Installation Guides/Tutorials is our main goal in Yes Android USA, so we are not always offering here Android apps, but sometimes we do that with special featured apps to do something we need.

Now you can get your best Cup of Coffee or your best drink and keep focusing with next Step-by-Step Guide to avoid any problems or mistakes. Also at the end of this post you will find a short video that explained How to Flash any Samsung device manually with Odin (You will know more about Odin just complete the tutorial).
Update Note 4 SM-N910V N910VVRU2BOG5 Android 5.0.1
Now you should know that there are several ways to Update Official Firmware, so if you want to Update your Galaxy Note 4 SM-N910V Official Firmware to N910VVRU2BOG5 Android 5.0.1 Lollipop, you will do it with one of the two following methods. These methods is, Official Methods to Update Galaxy Note 4 SM-N910V and the other method is the Manual method. Official method have two ways that we can use one of them to Update Note 4 SM-N910V Firmware, these ways is, Through Samsung Kies and Through OTA (Over The Air), but if we can't get this update with these official ways or this Official Method, we will move to the other method and as we said before it is the Manual method and in this method we will use a Windows Based Tool Called Odin.

Don't jump to another part of the post :) because i want to tell you an important thing, this Firmware Update is Only for Galaxy Note 4 SM-N910V, so please don't try this Firmware Update with any other model. Make sure that your phone model number is SM-N910V not any other model number, so let's make it officially.

Note: This Firmware Update is only released for Note 4 SM-N910V and not for any other model, so Yes Android USA is not responsible for any damage caused in your phone. Do it at your own risk, and please don't mistake and do it the right way.

Related To Galaxy Note 4 :

Update Note 4 SM-N910V N910VVRU2BOG5 Android 5.0.1

Update Galaxy Note 4 SM-N910V N910VVRU2BPA1 Android 5.1.1

Update Galaxy Note 4 SM-N910T N910TUVU2DOK2 Android 5.1.1

Update Galaxy Note 4 SM-N910R4 N910R4TYU1BOG2 Android 5.0.1

Always we advise you to update your Android Phone Firmware to fix Bugs and Errors, also it will increase the performance of your phone and sometimes add some features. We will help you to do that, so let's begin the Firmware Installation Guide.

How to Update Galaxy Note 4 SM-N910V to N910VVRU2BOG5 Android 5.0.1 Lollipop?

Before doing anything create a full backup of your important data to avoid data lose and make sure that your phone's battery is fully charged or have 75% at least.

[1] Update Galaxy Note 4 SM-N910V with the Official Method (Recommended)

(a) Get the Official Firmware Update through Samsung Kies :

As we said before that the Official Method have two ways to Update your Galaxy Note 4 Firmware to N910VVRU2BOG5 Android 5.0.1 Lollipop, and this way is one of them, yes through Desktop Samsung Kies, so follow the following instructions to get this Firmware Update:

- Download, install Samsung Kies to your PC, and run it.
- Make Sure that is your Computer is connected to the Internet.
- Connect your Galaxy Note 4 SM-N910V to USB port in your PC via USB data transfer cable.
- Wait for your Galaxy Note 4 to appear on the upper left side of the window.
- Click on the device name that appeared on Kies it will be (SM-N910V).
- A new window will appear on the right side of Kies.
- Under the "Firmware Information" tab, see if there are any updates available. If there are any Updates available you will see this message "New Firmware is available".
- To start installing this N910VVRU2BOG5 Android 5.0.1 Lollipop on Galaxy Note 4 SM-N910V press the "Firmware Upgrade" button.
- A new window will appear and this process contains more phases: (Download > Upgrade > Complete).
- At the end of Updating Galaxy Note 4 SM-N910V to N910VVRU2BOG5 Android 5.0.1 Lollipop, your device will reboot and now you can safely disconnecting the USB cable from your phone.
- You can verify if you have the N910VVRU2BOG5 Android 5.0.1 Lollipop Official Firmware Update by going to: Settings > More > About phone, you will find the new Firmware details.

(b) Get the Official Firmware Update through OTA (Over The Air) :

It is the second way to get the Firmware Update for your Galaxy Note 4 SM-N910V, so follow the following steps to get the Firmware Update N910VVRU2BOG5 Android 5.0.1 Lollipop.

- Make Sure that is your Phone is connected to the Internet, we recommend you to use Wi-Fi connection.
- Go to Settings on your Note 4 SM-N910V.
- Choose More Tab, if you don't have More Tab Skip this Step.
- Choose About Phone.
- Choose Software Update.
- Click on "Check For Updates". It will take few seconds or even 1 minute to check for updates, so if there any new updates available for your Note 4 SM-N910V you will get this message "New Firmware Update Available".
- If you get this message, click Download or Update Now.
- After downloading click Install to start Firmware Updating Installation Process.
Short Explain For OTA: Settings > More > About Phone > Software Update > Check For Updates.

[2] Update Galaxy Note 4 SM-N910V with the Manual Method (Using Odin)

Odin is a MS Windows based tool to help Windows Users to Flash Firmware Manually. You will find more about Odin and how to use it Here

As we said we will use Odin to Flash the New Firmware Update N910VVRU2BOG5 Android 5.0.1 Lollipop on Galaxy Note 4 SM-N910V and i repeat Note 4 SM-N910V only not any other model number even if it is with the same Phone Model Name. Again [[SM-N910V]] Only :) . To complete Flashing/Updating your Current Firmware successfully with Odin, please follow the following steps carefully.

(a) Download the Firmware File VZW-N910VVRU2BOG5-20150813135520

N910VVRU2BOG5 Android 5.0.1 Lollipop Official Firmware Details:

VRU2BOG5 Firmware
Model : SM-N910V
Model Name : Galaxy Note 4
Country : USA (Verizon)
Version : Android 5.0.1
Changelist : 5119222
Product Code : VZW
PDA : N910VVRU2BOG5
CSC : N910VVZW2BOG5

If there are another Country/Carrier for Note 4 SM-N910V and your are looking for it, just go to This Page.

(b) Extract the Firmware File you downloaded VZW-N910VVRU2BOG5-20150813135520 .ZIP , Yes it is the name of the Firmware File.

(c) Download Odin 3.10.7 from Here.

(d) Extract Odin 3.10.7 ZIP File.

(e) Download and Install Note 4 SM-N910V USB driver from Here.  If you already have Samsung Kies installed on your PC, you will not need to download the USB driver. No problem if you downloaded and installed it again.

(f) Enable USB Debugging Mode on your Note 4 SM-N910V.
To Enable USB Debugging Mode go to your phone Settings and activate Developer Options, then Enable USB Debugging Mode option.

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

If you can't find Developer Options in your Phone Settings Go to Settings > More > About Phone > Press 7 Times on Build Number to Enable and Show Developer Options.

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

(g) Turn Off your Phone and Turn it on again into the Download Mode.
To Enter Download Mode Press and Hold "Power + Volume Up + Home Button" all at the same time.

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

When you see the warning message release the buttons and press Volume Up button to confirm Entering the Download Mode.

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

(h) Start Odin in Your PC (You Need to run Odin as Administrator).

(i) Connect your Galaxy Note 4 SM-N910V to your PC via USB Cable.

(j) If your Note 4 SM-N910V is recognized in Odin, you will See in Odin a section called ID:COM turned into Blue color (on the left upper side of Odin window). If the Phone is not recognized, make sure that you have installed the USB Driver.

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA
N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

(k) Check "AP" box or in some Odin versions you will find it called "PDA", after checking "AP/PDA" box, click on "AP/PDA" button and add the Firmware File you just extracted from the Firmware ZIP File. The Firmware File name should be VZW-N910VVRU2BOG5-20150813135520 .tar.md5 .

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

(l) This step is very Important. Don't Place anything under the "PIT" section and make sure that "Re-partition" is not checked (In the newer versions of Odin you will find in the left side a tab called PIT).

(m) Make sure that you only checked this options in Odin (Auto Reboot, F.Reset Time). These options is checked by default.

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

(n) When the Firmware File (VZW-N910VVRU2BOG5-20150813135520 .tar.md5) is loaded in Odin, Press Start to begin the Firmware Updating/Installation Process.

Notes:
- If you are installed any kind of Custom ROMs on your Note 4 SM-N910V such as "CyanogenMod ROM, ParanoidAndroid ROM, SLIM ROM, AOKP ROM, Avatar ROM, Omni ROM, PACman ROM, KiquidSmooth ROM, Beanstalk ROM or Carbon ROM", it will replaced with the new Stock Firmware or the new Stock ROM.

- If you are installed any Kind of Custom Recovery on your SM-N910V such as "CWM Recovery, TWRP Recovery", it will replaced also by the new Stock Recovery.

- If your Note 4 SM-N910V is Rooted, you will lose your Root. Don't worry you will be able to Root your Note 4 SM-N910V again after Upgrading your Current Firmware, but you can do it if the Root files is available for the new Firmware VRU2BOG5 5.0.1 Lollipop SM-N910V.

(o) It's not recommended to move or touch the USB Cable while the Firmware is being Flashed to avoid any Errors or Disconnecting.

(p) You will see on the left upper side of Odin window a message with a green background sayin PASS!!. It means that is the Firmware Update is Successfully installed on you Note 4 SM-N910V. Your device will reboot now and run on the New Firmware.

N910VVRU2BOG5 Android 5.0.1 Lollipop Galaxy Note 4 SM-N910V - Yes Android USA

(q) Finally you may face Stuck in bootloop problem. If your Note 4 SM-N910V stuck in bootloop, turn it off and start it again into Recovery Mode by Pressing and hold (Volume Up + Home + Power) buttons all at the same time. When entering the Recovery Mode, Choose "Wipe Cache Partition" > "Wipe data/factory reset" > "Yes delete all user data" > "Reboot system now", after that your phone will start normally again.

Now your Note 4 SM-N910V should run with the New Firmware Update N910VVRU2BOG5 5.0.1 Lollipop.

SM-N910V Firmware Update Summary Guide

[1] Firmware Update with Official Methods:

(a) Update the Firmware with Samsung Kies :

- Download, install Samsung Kies to your PC, and run it.
- Make Sure that is your PC is connected to the Internet.
- Connect your Phone to USB port in your PC via USB data transfer cable.
- Wait for your Phone to appear on the upper left side of the window.
- Click on the device name that appeared on Kies it will be (SM-N910V).
- A new window will appear on the right side of Kies.
- Under the "Firmware Information" tab see if there are any updates available. If so, you will see this message "New Firmware is available".
- To start installing the Firmware Update press the "Firmware Upgrade" button.
- A new window will appear and this process contains more phases: (Download > Upgrade > Complete).
- At the end of Firmware Updating Process, your device will reboot and now you can safely disconnect the USB cable from your phone.
- You can verify if you have the New Official Firmware Update by going to: Settings > More > About phone.

(b) Get the Official Firmware Update through OTA (Over The Air) :

- Make Sure that is your Phone is connected to the Internet, we recommend you to use Wi-Fi connection.
- Go to Settings on your Note 4 SM-N910V.
- Choose More Tab, if you don't have More Tab Skip this Step.
- Choose About Phone.
- Choose Software Update.
- Click on "Check For Updates", if there any new updates available for your Phone you will get a message says " New Firmware Update Available".
- If you get this message, press Download or Update Now.
- After downloading click Install to start Firmware Updating Installation Process.

[2] Update your Phone with the Manual Method (Using Odin)

(a) Download the Firmware File.
(b) Extract the Firmware File.
(c) Download Odin 3.10.7.
(d) Extract Odin 3.10.7 ZIP File.
(e) Download USB driver for your Phone.
(f) Enable USB Debugging Mode on your Phone Settings.
(g) Turn Off your Phone and Turn it on into the Download Mode.
(h) Start Odin in Your PC (Run Odin as Administrator).
(i) Connect your Phone to your PC via USB Cable.
(j) If your Phone is recognized in Odin, you will See in Odin a section called ID:COM turned into Blue color.
(k) Check "AP/PDA" box and click on "AP/PDA" button to add the Firmware File.
(l) Important!! Don't Place anything under the PIT section and make sure that "Re-partition" is not checked.
(m) Make sure that is these options in Odin is only checked (Auto Reboot, F.Reset Time).
(n) When the Firmware File is loaded in Odin, Press Start to begin the Firmware Updating/Installation Process.
(p) You will see on the left upper side of Odin the success message with a green background. It means the Firmware Updating Process Completed Successfully.

If you like my work and think this tutorial can, help you can make a Small Donation to help keeping this Blog Alive. You can make your PayPal Donation through this page. Thank You.
 
Don't Forget to share :). Also you can watch this short Video to learn:

How to Flash any Samsung Official Firmware manually with Odin